D-Link DGS-3620-52T CLI Guide - Page 459
show igmp group
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 459 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Example To display the IGMP configuration for all interfaces: DGS-3620-28SC:admin#show igmp Command: show igmp IGMP Interface Configurations Interface IP Address/Netmask System 10.90.90.90/8 Ver- Query Maximum Robust- Last State sion Response ness Member Time Value Query Interval 3 125 10 2 1 Disabled Total Entries: 1 DGS-3620-28SC:admin# 37-3 show igmp group Description This command is used to display the switch's IGMP group table. Format show igmp group {group | ipif } Parameters group - (Optional) Specifies the multicast group ID. - Enter the multicast group ID value here. ipif - (Optional) Specifies the IP interface name used for this configuration. - Enter the IP interface name used for this configuration here. This name can be up to 12 characters long. all - Specifies that all the IP interfaces will be used. If no parameter is specified, the system will display all IGMP group tables. Restrictions None. Example To display the IGMP group table: DGS-3620-28SC:admin# show igmp group Command: show igmp group Interface -----------System Multicast Group Last Reporter IP Querier 224.0.0.2 10.42.73.111 10.48.74.122 IP Expire --------260 454