D-Link DGS-3620-52T CLI Guide - Page 1052

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 103-13 config rcp server Description This command is used to configure Remote Copy Protocol (RCP) global server information. This global RCP server setting can be used when the server or remote user name is not specified. Only one RCP server can be configured for each system. If a user does not specify the RCP server in the CLI command, and the global RCP server was not configured, the switch will ask the user to input the server IP address or remote user name while executing the RCP commands. Format config rcp server {ipaddress | username } Parameters ipaddress - (Optional) Specify the IP address of the global RCP server. By default, the server is unspecified. - Specify the IP address of the RCP server. username - (Optional) Specify the remote user name on the RCP server. - Specify the remote user name on the RCP server. Restrictions Only Administrator-level users can issue this command. Example To configure RCP global server information for the username "travel": DGS-3620-28SC:admin#config rcp server username travel Command: config rcp server username travel Success. DGS-3620-28SC:admin# 103-14 config rcp server clear Description This command is used to clear Remote Copy Protocol (RCP) global server information. Format config rcp server clear [ipaddr | username | both] Parameters ipaddr - Clear the IP address of the RCP server. username - Clear the username of the RCP server. both - Clear both the IP address and the username of the RCP server. 1047