D-Link DGS-3620-52T CLI Guide - Page 888
show port dot1v
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 888 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format config port dot1v ports [ | all] [add protocol_group [group_id | group_name ] [vlan | vlanid ] {priority } | delete protocol_group [group_id | all]] Parameters - Specify a range of ports to apply this command. all - Specify all ports. add protocol_group - Specify to add a protocol group. group_id - Specify the group ID of the protocol group. - Specify the group ID of the protocol group. group_name - Specify the name of the protocol group. - Specify the name of the protocol group. The maximum length is 32 characters. vlan - Specify the VLAN that is to be associated with this protocol group on this port. - Specify the VLAN that is to be associated with this protocol group on this port. The maximum length is 32 characters. vlanid - Specify the VLAN ID. - Specify the VLAN ID. priority - Specify the priority to be associated with the packet which has been classified to the specified VLAN by the protocol. - Specify a value between 0 and 7. delete protocol_group - Specify to delete a protocol group. group_id - Specify the group ID to be deleted. - Specify the group ID. all - Specify all groups. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the group ID 4 on port 3 to be associated with VLAN 2: DGS-3620-28SC:admin# config port dot1v ports 3 add protocol_group group_id 4 vlan VLAN2 Command: config port dot1v ports 3 add protocol_group group_id 4 vlan VLAN2 Success. DGS-3620-28SC:admin# 80-6 show port dot1v Description This command is used to display the VLAN to be associated with untagged packets ingressed from a port based on the protocol group. Format show port dot1v {ports } 883