D-Link DGS-3620-52T CLI Guide - Page 170

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide For session state, if the peer group is configure to disable, all the members can't set to enable. For session activity, can't set the peer group to disable. As for the description attribute, setting the peer group will not affect the setting for an individual peer. After this command is executed, all peers belonging to this peer group, which are generated with no indicated AS number, will change their AS number to the same value as the peer group's, stop and restarted values. If the peer group remote AS has a value of zero, it means "no remote_as", and members that are generated with no indicated AS number will be deleted. Format config bgp peer_group [remote_as | [add | delete] ] Parameters - This is the name of the BGP peer group. This name can be up to 16 characters long. remote_as - The number of autonomous systems to which the peer group belongs to. - Enter the remote AS value here. This value must be between 0 and 65535. add - Specifies to add an IP address. delete - Specifies to delete an IP address. - Enter the IP address to be added or deleted here. Restrictions Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only Command) Example To delete a member from the peer group named local: DGS-3620-28SC:admin# config bgp peer_group local delete 10.2.2.2 Command: config bgp peer_group local delete 10.2.2.2 Success. DGS-3620-28SC:admin# To set a peer group named local remote_as to 50: DGS-3620-28SC:admin# config bgp peer_group local remote_as 50 Command: config bgp peer_group local remote_as 50 Success. DGS-3620-28SC:admin# 165