D-Link DGS-3620-52T CLI Guide - Page 47

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide DGS-3620-28SC:admin# config 802.1x max_users 2 Command: config 802.1x max_users 2 Success. DGS-3620-28SC:admin# 3-15 config 802.1x reauth Description This command is used to reauthenticate the device connected with the port. During the reauthentication period, the port status remains authorized until failed reauthentication. Format config 802.1x reauth [port_based ports [ | all] |mac_based ports [ | all] {mac_address }] Parameters port_based ports - The switch passes data based on its authenticated port. - Specify a range of ports to be configured. all - Specify to configure all ports. mac_based ports - The switch passes data based on the MAC address of authenticated RADIUS client. - Specify a range of ports to be configured. all - Specify to configure all ports. mac_address - (Optional) Specify the MAC address of the authenticated RADIUS client. - Enter the MAC address here. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To reauthenticate the device connected with the port: DGS-3620-28SC:admin# config 802.1x reauth port_based ports all Command: config 802.1x reauth port_based ports all Success. DGS-3620-28SC:admin# 3-16 create 802.1x guest_vlan Description This command is used to assign a static VLAN to be a guest VLAN. The specific VLAN which is assigned to a guest VLAN must already exist. The specific VLAN which is assigned to the guest VLAN can't be deleted. 42