D-Link DGS-3620-52T CLI Guide - Page 364

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Example To configure the default router: DGS-3620-28SC:admin#config dhcp pool default_router nyknicks 10.10.10.1 Command: config dhcp pool default_router nyknicks 10.10.10.1 Success. DGS-3620-28SC:admin# 23-12 config dhcp pool lease Description This command is used to specify the duration of the DHCP pool lease. By default, each IP address assigned by a DHCP server comes with a one-day lease, which is the amount of time that the address is valid. Format config dhcp pool lease [ | infinite] Parameters - Specify the DHCP pool's name. - Specify the number of days of the lease. - Specify the number of hours of the lease. - Specify the number of minutes of the lease. infinite - Specify a lease of unlimited duration. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the lease of a pool: DGS-3620-28SC:admin#config dhcp pool lease nyknicks infinite Command: config dhcp pool lease nyknicks infinite Success. DGS-3620-28SC:admin# 23-13 config dhcp pool boot_file Description This command is used to specify the name of the file that is used as a boot image. The boot file is used to store the boot image for the client. The boot image is generally the operating system the client uses to load. If this command is input twice for the same pool, the 359