D-Link DGS-3620-52T CLI Guide - Page 89
Optional Specify Urgent Pointer field significant.
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide ip - Specify an IP access control list rule. vlan - Specify the VLAN name. -Specify the VLAN name. The maximum length is 32 characters. vlanid - Specify the VLAN ID. - Specify the VLAN ID between 1 and 4094. mask - (Optional)Specify the mask. - Specify the mask. source_ip - Specify an IP source address. - Specify an IP source address. mask - (Optional) Specify the mask. - Specify the mask. destination_ip - Specify an IP destination address. - Specify an IP destination address. mask - (Optional) Specify the mask. - Specify the mask. dscp - Specify the value of DSCP. - Specify the value of DSCP. The DSCP value ranges from 0 to 63. icmp - Specify the ICMP. type - (Optional) Specify that the rule will apply to the ICMP Type traffic value. - Specify the value between 0 and 255. code - (Optional) Specify that the rule will apply to the ICMP Code traffic value. - Specify the value between 0 and 255. igmp - Specify the IGMP. type - (Optional) Specify that the rule will apply to the IGMP Type traffic value. - Specify the value between 0 and 255. tcp - Specify TCP. src_port - (Optional) Specify that the rule will apply to a range of TCP source ports. - Specify the value between 0 and 65535. mask - (Optional) Specify the mask. - Specify the mask. dst_port - (Optional) Specify that the rule will apply to a range of TCP destination ports. - Specify the value between 0 and 65535. mask - (Optional) Specify the mask. - Specify the mask. flag - Specify the TCP flag field value. all - Specify to check all paramenters below. urg - (Optional) Specify Urgent Pointer field significant. ack - (Optional) Specify Acknowledgment field significant. psh - (Optional) Specify Push Function. rst - (Optional) Specify to reset the connection. syn - (Optional) Specify to synchronize sequence numbers. fin - (Optional) No more data from sender. udp - Specify UDP. src_port - (Optional) Specify the UDP source port range. - Specify the value between 0 and 65535. mask - (Optional) Specify the mask. - Specify the mask. dst_port - (Optional) Specify the UDP destination port range. - Specify the value between 0 and 65535. mask - (Optional) Specify the mask. - Specify the mask. protocol_id - Specify that the rule will apply to the value of IP protocol ID traffic. - Specify the value between 0 and 255. user_define - (Optional) Specify that the rule will apply to the IP protocol ID and that the mask options behind the IP header, which has a length of 4 bytes. - Specify that the rule will apply to the IP protocol ID and that the mask options behind the IP header, which has a length of 4 bytes. mask - (Optional) Specify the mask. - Specify the mask. packet_content - Specify the packet content for the user defined mask. 84