D-Link DGS-3620-52T CLI Guide - Page 776
show ospf neighbor, show ospf virtual_neighbor
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 776 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 69-23 show ospf neighbor Description This command is used to display the OSPF-neighbor information on a per-interface basis. Format show ospf neighbor {} Parameters - (Optional) Specifies the IP address of the neighbor router. If no parameter is specified, the system will display all OSPF neighbor information. Restrictions None. Example To display OSPF neighbor information: DGS-3620-28SC:admin# show ospf neighbor Command: show ospf neighbor IP Address of Router ID of Neighbor Neighbor Neighbor Neighbor Priority State 10.48.74.122 10.2.2.2 1 Initial Total Entries : 1 DGS-3620-28SC:admin# 69-24 show ospf virtual_neighbor Description This command is used to display the OSPF-neighbor information of OSPF virtual links. Format show ospf virtual_neighbor { } Parameters - (Optional) Specifies a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. - (Optional) Specifies the OSPF router ID for the remote area. This is a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the remote area's Area Border Router. If no parameter is specified, the system will display all OSPF virtual-link neighbor information. 771