D-Link DGS-3620-52T CLI Guide - Page 219

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format config cfm md [ | md_index ] {mip [none | auto | explicit] | sender_id [none | chassis | manage | chassis_manage]}(1) Parameters - Enter the maintenance domain name used here. This name can be up to 22 characters long. md_index - Specifies the maintenance domain index used. - Enter the maintenace domain index value used here. This value must be between 1 and 4294967295. mip - (Optional) This is the control creations of MIPs. none - Do not create MIPs. This is the default value. auto - MIPs can always be created on any port in this MD if the port is not configured with an MEP of this MD. explicit - MIPs can only be created on any port in this MD if the next existing lower level has an MEP configured on that port, and that port is not configured with an MEP of this MD. sender_id - (Optional) This is the control transmission of the sender ID TLV. none - Do not transmit the sender ID TLV. This is the default value. chassis - Transmit the sender ID TLV with the chassis ID information. manage - Transmit the sender ID TLV with the managed address information. chassis_manage - Transmit the sender ID TLV with chassis ID information and manage address information. Restrictions Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only Command) Example To configure the maintenance domain called "op_domain" and specify the explicit option for creating MIPs: DGS-3620-28SC:admin#config cfm md op_domain mip explicit Command: config cfm md op_domain mip explicit Success. DGS-3620-28SC:admin# 15-3 create cfm ma Description This command is used to create a maintenance association. Different MAs in a MD must have different MA Names. Different MAs in different MDs may have the same MA Name. Format create cfm ma {ma_index } md [ | md_index ] 214