D-Link DGS-3620-52T CLI Guide - Page 1057
telnet
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1057 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Parameters - Specify the IPv6 address of the destination end station. ttl - (Optional) Specify the time to live value of the trace route request. - Specify the time to live value of the trace route request. This is the maximum number of routers that a trace route packet can pass while seeking the network path between two devices. The range for the TTL is 1 to 60 hops. The default value is 30. port - (Optional) Specify the port number. - Specify the port number. The value range is from 30000 to 64900. The default is 33435. timeout - (Optional) Specify the timeout period while waiting for a response from the remote device. - Specify the timeout period while waiting for a response from the remote device. A value of 1 to 65535 seconds can be specified. The default is 5 seconds. probe - (Optional) Specify the number of probes. - Specify the number of probes. The range is from 1 to 9. If unspecified, the default value is 1. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example Trace the IPv6 routed path between the switch and 3000::1: DGS-3620-28SC:admin# traceroute6 3000::1 probe 3 Command: traceroute6 3000::1 probe 3 1