D-Link DGS-3620-52T CLI Guide - Page 42

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 3-8 config 802.1x capability ports Description This command is used to configure port capability. Format config 802.1x capability ports [ | all] [authenticator | none] Parameters - Specify a range of ports to be configured. all - Specify to configure all ports. authenticator - The port that wishes to enforce authentication before allowing access to services that are accessible via that port adopts the authenticator role. none - Disable authentication on specified port. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure port capability for ports 1 to 10: DGS-3620-28SC:admin#config 802.1x capability ports 1-10 authenticator Command: config 802.1x capability ports 1-10 authenticator Success. DGS-3620-28SC:admin# 3-9 config 802.1x fwd_pdu ports Description This command is used to configure the 802.1X PDU forwarding state on specific ports of the switch. Format config 802.1x fwd_pdu ports [ | all] [enable | disable] Parameters - Specify a range of ports to be configured. all - Specify all ports. enable - Enable the 802.1X PDU forwarding state. disable - Disable the 802.1X PDU forwarding state. 37