D-Link DGS-3620-52T CLI Guide - Page 597
show limited_multicast_addr
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 597 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To add multicast address profile 2 to ports 1 and 3: DGS-3620-28SC:admin#config limited_multicast_addr ports 1,3 add profile_id 2 Command: config limited_multicast_addr ports 1,3 add profile_id 2 Success. DGS-3620-28SC:admin# 51-7 show limited_multicast_addr Description This command is used to display a multicast address range by ports or by VLANs. When the function is configured on a port or VLAN, it limits the multicast group operated by the IGMP/MLD snooping function and layer 3 function. If the IPv4 or IPv6 option is not specified, IPv4 is implied. Format show limited_multicast_addr [ ports | vlanid ] {[ipv4 | ipv6]} Parameters ports - Specify a range of ports to show the limited multicast address configuration. - Specify a range of ports to be displayed. vlanid - Specify the VLAN ID of VLANs that require information displaying about the multicast address filtering function. - Enter the VLAN ID of the VLAN here. ipv4 - (Optional) Specify to display the IPv4 multicast profile associated with the port or VLAN. ipv6 - (Optional) Specify to display the IPv6 multicast profile associated with the port or VLAN. Restrictions None. Example To display the limited multicast address range on VLAN 1: DGS-3620-28SC:admin#show limited_multicast_addr vlanid 1 Command: show limited_multicast_addr vlanid 1 VLAN : 1 Access : Deny Profile ID ----------1 Name ----------customer Multicast Addresses 224.19.62.34 - 224.19.162.200 592