D-Link DGS-3620-52T CLI Guide - Page 634
config loopdetect log state
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 634 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format config loopdetect trap [none | loop_detected | loop_cleared | both] Parameters none - Trap will not be sent for both cases. loop_detected - Trap is sent when the loop condition is detected loop_cleared - Trap is sent when the loop condition is cleared. both - Trap will be sent for both cases. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure a trap: DGS-3620-28SC:admin#config loopdetect trap both Command: config loopdetect trap both Success. DGS-3620-28SC:admin# 54-1 config loopdetect log state Description This command is used to configure the log state for LBD. The default value is enabled. Format config loopdetect log state [enable | disable] Parameters state - Specifies the LBD log feature's state. enable - Specifies that the LBD log feature will be enabled. disable - Specifies that the LBD log feature will be disabled. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To enable the log state for LBD: DGS-3620-28SC:admin# config loopdetect log state enable Command: config loopdetect log state enable 629