D-Link DGS-3620-52T CLI Guide - Page 230

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Example To display the CFM configuration: DGS-3620-28SC:admin#show cfm Command: show cfm CFM State: Enabled MD Index ---------1 MD Name op_domain Level ----2 DGS-3620-28SC:admin# 15-15 show cfm fault Description This command is used to display all the fault conditions detected by the MEPs contained in the specified MA or MD. The display provides the overview of the fault status by MEPs. Format show cfm fault {md [ | md_index ] {ma [ | ma_index ]}} Parameters md - (Optional) Specify the maintenance domain name. - Specify the maintenance domain name. The maximum length is 22 characters. md_index - Specify the maintenance domain index. - Enter the maintenance domain index value here. This value must be between 1 and 4294967295. ma - (Optional) Specify the maintenance association name. - Specify the maintenance association name. The maximum length is 22 characters. ma_index - Specify the maintenance association index. - Enter the maintenance association index value here. This value must be between 1 and 4294967295. Restrictions None. (EI Mode Only Command) Example To display the MEPs that have faults: DGS-3620-28SC:admin#show cfm fault Command: show cfm fault MD Name MA Name MEPID Status AIS Status LCK Status 225