D-Link DGS-3620-52T CLI Guide - Page 8

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide In the above example, the Switch was assigned an IP address of 10.24.22.100 with a subnet mask of 255.0.0.0. The system message Success indicates that the command was executed successfully. The Switch can now be configured and managed via Telnet, SNMP MIB browser and the CLI or via the Web-based management agent using the above IP address to connect to the Switch. There are a number of helpful features included in the CLI. Entering the ? command will display a list of all of the top-level commands. DGS-3620-28SC:admin#? Command: ? .. ? cable_diag ports cd cfm linktrace cfm lock md cfm loopback change drive clear clear address_binding dhcp_snoop binding_entry ports clear address_binding nd_snoop binding_entry ports clear arptable clear attack_log clear bgp clear bgp dampening clear bgp flap_statistics clear cfm pkt_cnt clear counters clear dhcp binding clear dhcp conflict_ip clear dhcpv6 binding clear ethernet_oam ports CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All When entering a command without its required parameters, the CLI will prompt you with a Next possible completions: message. DGS-3620-28SC:admin#config account Command: config account Next possible completions: DGS-3620-28SC:admin# In this case, the command config account was entered with the parameter . The CLI will then prompt to enter the with the message, Next possible completions:. Every command in the CLI has this feature, and complex commands have several layers of parameter prompting. 3