D-Link DGS-3620-52T CLI Guide - Page 242
config cfm ais md
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 242 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide DGS-3620-28SC:admin# 15-28 config cfm ais md Description This command is used to configure the parameters of the AIS function on a MEP. Format config cfm ais md [ | md_index ] ma [ | ma_index ] mepid {period [1sec | 1min] | level | state [enable | disable]} Parameters md - Specify the maintenance domain name. - Specify the maintenance domain name. The maximum length is 22 characters. md_index - Specify the maintenance domain index. - Enter the maintenance domain index value here. This value must be between 1 and 4294967295. ma - Specify the maintenance association name. - Specify the maintenance association name. The maximum length is 22 characters. ma_index - Specify the maintenance association index. - Enter the maintenance association index value here. This value must be between 1 and 4294967295. mepid - Specify the MEPID. - Specify the MEP MEPID between 1 and 8191. period - (Optional) Specifies the transmitting interval of the AIS PDU. 1sec - Specifies that the transmitting interval period will be set to 1 second. 1min - Specifies that the transmitting interval period will be set to 1 minute. level - (Optional) Specifies the client level ID to which the MEP sends AIS PDU. The default client MD level is the MD level that the most immediate client layer MIPs and MEPs exist on. - Enter the client level ID used here. This value must be between 0 and 7. state - (Optional) Specifies the AIS function state used. enable - Specifies that AIS function state will be enabled. disable - Specifies that AIS function state will be disabled. Restrictions Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only Command) Example To configure the AIS function so that it is enabled and has a client level of 5: 237