D-Link DGS-3620-52T CLI Guide - Page 45

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Example To configure the parameters that control the operation of the authenticator associated with a port: DGS-3620-28SC:admin# config 802.1x auth_parameter ports 1-20 direction both Command: config 802.1x auth_parameter ports 1-20 direction both Success. DGS-3620-28SC:admin# 3-12 config 802.1x authorization attributes radius Description This command is used to enable or disable the acceptation of an authorized configuration. (To configure that attributes, regarding VLAN, 802.1p, ACL and Ingress/Egress Bandwidth, please refer to the Appendix section at the end of this document.) Format config 802.1x authorization attributes radius [enable | disable] Parameters enable - The authorization attributes such as VLAN, 802.1p default priority, and ACL assigned by the RADUIS server will be accepted if the global authorization status is enabled. The default state is enabled. disable - The authorization attributes assigned by the RADUIS server will not be accepted. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the 802.1X state of acceptation of an authorized configuration: DGS-3620-28SC:admin#config 802.1x authorization attributes radius enable Command: config 802.1x authorization attributes radius enable Success. DGS-3620-28SC:admin# 3-13 config 802.1x init Description This command is used to initialize the authentication state machine of some or all. 40