D-Link DGS-3620-52T CLI Guide - Page 648
create mac_based_access_control
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 648 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format config mac_based_access_control ports [ | all] {state [enable | disable] | aging_time [infinite | ] | block_time | max_users [ | no_limit]}(1) Parameters - Specify a range of ports to configure the MAC-based access control settings all - Specify to select all the ports. state - Specify whether the MAC-based access control function is enabled or disabled. enable - Specify to enable the MAC-based access control function. disable - Specify to disable the MAC-based access control function. aging_time - Specify a time period during which an authenticated host will be kept in the authenticated state. When the aging time is timed-out, the host will be moved back to unauthenticated state. infinite - Specify an unlimited aging time. - Specify the age-out time, in minutes, between 1 and 1440. block_time - Specify the blocking time, in seconds, between 0 and 300. - Specify the blocking time. The blocking time value must be between 0 and 300 seconds. max_users - Specify the number of maximum users. The default value is 128 users. - Specify the maximum number of users between 1 and 4000. no_limit - Specify an unlimited number of users. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the port state for ports 1 to 8: DGS-3620-28SC:admin# config mac_based_access_control ports 1-8 state enable Command: config mac_based_access_control ports 1-8 state enable Success. DGS-3620-28SC:admin# 57-7 create mac_based_access_control Description This command is used to create a MAC-based access control guest VLAN. Format create mac_based_access_control [guest_vlan | guest_vlanid ] 643