D-Link DGS-3620-52T CLI Guide - Page 478
show igmp_snooping rate_limit
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 478 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format config igmp_snooping rate_limit [ports | vlanid ] [ | no_limit] Parameters ports - Specify a range of ports to be configured. - Specify a range of ports to be configured. vlanid - Specify a range of VLANs to be configured. - Specify the VLAN ID list. - Specify the rate of IGMP control packets that the switch can process on a specific port/VLAN. The rate is specified in packet per second. The packets that exceed the limited rate will be dropped. no_limit - The default setting is no limit. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the IGMP snooping rate limit for ports 1-2 to have no limit: DGS-3620-28SC:admin#config igmp_snooping rate_limit ports 1-2 no_limit Command: config igmp_snooping rate_limit ports 1-2 no_limit Success. DGS-3620-28SC:admin# 39-10 show igmp_snooping rate_limit Description This command is used to display the IGMP snooping rate limit setting. Format show igmp_snooping rate_limit [ports | vlanid ] Parameters ports - Specify a range of ports to be displayed. - Specify a range of ports to be displayed. vlanid - Specify a range of VLANs to be displayed. - Specify the VLAN ID list. Restrictions None. 473