D-Link DGS-3620-52T CLI Guide - Page 240
clear cfm pkt_cnt
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide DGS-3620-28SC:admin# 15-26 clear cfm pkt_cnt Description This command is used to clear the CFM packet's RX/TX counters. Format clear cfm pkt_cnt {[ports {[rx | tx]} | [rx | tx] | ccm]} Parameters ports - (Optional) Specify the port counters to clear. If not specified, all ports will be cleared. - Specify a list of ports. rx - (Optional) Clear the RX counter. If not specified, both the RX and TX counters will be cleared. tx - (Optional) Clear the TX counter. If not specified, both the RX and TX counters will be cleared. rx - (Optional) Clear the RX counter. If not specified, both the RX and TX counters will be cleared. tx - (Optional) Clear the TX counter. If not specified, both the RX and TX counters will be cleared. ccm - (Optional) Clear The CCM RX counters. Restrictions Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only Command) Example To clear all the CFM packet RX/TX counters: DGS-3620-28SC:admin#clear cfm pkt_cnt Command: clear cfm pkt_cnt Success. DGS-3620-28SC:admin# To clear the CFM packet CCM counters: DGS-3620-28SC:admin#clear cfm pkt_cnt ccm Command: clear cfm pkt_cnt ccm Success. DGS-3620-28SC:admin# 235