D-Link DGS-3620-52T CLI Guide - Page 1047

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide path, the path search strategy will depend on the server system. For some systems, the current user working directory will be searched first, followed by the environment paths. - Specify the path name on the RCP server. rcp: - Specify the path name on the RCP server or local RCP client. Syntax: rcp: username@ipaddr/directory/filename. Example for full path: [email protected]/home/user_name/desxxxx.had. Example for relative path: [email protected]./desxxxx.had. Note: No spaces allowed in the . - Specify the path name on the RCP server or local RCP client. Syntax: rcp: username@ipaddr/directory/filename. Example for full path: [email protected]/home/user_name/desxxxx.had. Example for relative path: [email protected]./desxxxx.had. Note: No spaces allowed in the . unit - (Optinal) Specifies which unit on the stacking system. If it is not specified, it refers to the master unit. - Enter the unit ID used here. This value must be between 1 and 12. src_file - (Optional) Specify the path name of the source file. If not specified, the bootup image on the device will be uploaded. - Specify the path name of the source file. Restrictions Only Administrator and Operator-level users can issue this command. Example To upload firmware image to an RCP server: DGS-3620-28SC:admin#upload firmware_toRCP rcp: [email protected]/DGS3620.had src_file 2.00.009.had Command: upload firmware_toRCP rcp: [email protected]/DGS-3620.had src_file 2.00.009.had Connecting to server Done. Upload firmware Done. DGS-3620-28SC:admin# 103-8 upload log_toRCP Description This command is used to upload a log file from the device to a Remote Copy Protocol (RCP) server. Format upload log_toRCP [{username } {} dest_file | rcp: ] Parameters username - (Optional) Specify the remote user name on the RCP server. - Specify the remote user name on the RCP server. - (Optional) Specify the IP address of the RCP server. dest_file - Specify the path name of the RCP server. Note: If a user specifies the relative file path, the path search strategy will depend on the server system. For some systems, the 1042