D-Link DGS-3620-52T CLI Guide - Page 34
show device_status
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format show terminal width Parameters None. Restrictions None. Example To display the configuration of the current terminal width: DGS-3620-28SC:admin#show terminal width Command: show terminal width Global terminal width Current terminal width : 80 : 80 DGS-3620-28SC:admin# 2-28 show device_status Description This command displays current status of power(s) and fan(s) on the system. Within fan(s) status display, for example, there are three fans on the left of the switch, if three fans is working normally, there will display "OK" in the Left Fan field. If some fans work failed, such as fan 1,3 , there will only display the failed fans in the Left Fan field, such as "1,3 Fail". In the same way, the Right Fan, Back Fan is same to Left Fan. Because there is only one CPU Fan, if it is working failed, display "Fail", otherwise display "OK". Format show device_status Parameters None. Restrictions None. Example To show device status, the number 1, 2, 3 etc represent the fan number: 29