D-Link DGS-3620-52T CLI Guide - Page 761
show ospf aggregation
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 761 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Parameters - A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. - The IP address that uniquely identifies the network that corresponds to the OSPF Area. The network address format is 'IP address/prefix length'. lsdb_type - Specifies the LSDB type. summary - Specifies the LSDB type as summary. nssa_ext - Specifies the LSDB type as NSSA EXT. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To delete an OSPF area aggregation settings: DGS-3620-28SC:admin# delete ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary Command: delete ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary Success. DGS-3620-28SC:admin# 69-5 show ospf aggregation Description This command is used to display the current OSPF aggregation table. Format show ospf aggregation {} Parameters - (Optional) Enter the area ID used here. Restrictions None. Example To display OSPF aggregation settings: 756