D-Link DGS-3620-52T CLI Guide - Page 853
config port_security vlan
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 853 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format config port_security system max_learning_addr [ | no_limit] Parameters - Specify the maximum number of MAC address entries that can be learned by the system. If the setting is smaller than the number of current learned entries on all enabled ports, the command will be rejected. no_limit - By default, the number above is set to no limit. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the maximum number of port security entries to 256: DGS-3620-28SC:admin# config port_security system max_learning_addr 256 Command: config port_security system max_learning_addr 256 Success. DGS-3620-28SC:admin# 76-3 config port_security vlan Description This command sets the maximum number of MAC address entries that can be learned on a specific VLAN. There are four levels of limitations on the learned entry number, for the entire system, for a port, for a VLAN, and for specific VLAN on a port. If any limitation is exceeded, the new entry will be discarded. Format config port_security vlan [ | vlanid ] max_learning_addr [ | no_limit] Parameters - Specify the VLAN by name. The maximum length is 32 characters. vlanid - Specify a list of VLANs by VLAN ID. - Specify the VLAN ID. max_learning_addr - Specify the maximum number of MAC address entries that can be learned with this VLAN. If this parameter is set to 0, it means that no user can get authorization on this VLAN. If the setting is smaller than the number of current learned entries on the VLAN, the command will be rejected. - Specify the value between 0 and 3328. no_limit - Specify the default value is no limit. 848