D-Link DGS-3620-52T CLI Guide - Page 1048
config firmware image
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1048 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide current user working directory will be searched first, followed by the environment paths. - Specify the path name of the RCP server. rcp: - Specify the path name on the RCP server. - Specify the path name on the RCP server. Syntax: rcp: username@ipaddr/directory/filename. Example for full path: [email protected]/home/user_name/desxxxx.had. Example for relative path: [email protected]./desxxxx.had. Note: No spaces are allowed in the whole . Restrictions Only Administrator and Operator-level users can issue this command. Example To upload the log from the device to an RCP server: DGS-3620-28SC:admin#upload log_toRCP username rcp_user 172.18.212.104 dest_file /home/DGS-3620.log Command: upload log_toRCP username rcp_user 172.18.212.104 dest_file /home/DGS3620.log Connecting to server Done. Upload log Done. Success. To upload log from the device to an RCP server using an RCP string: DGS-3620-28SC:admin#upload log_toRCP rcp: [email protected]/home/DGS-3620.log Command: upload log_toRCP rcp: [email protected]/home/DGS-3620.log Connecting to server Done. Upload log Done. Success. DGS-3620-28SC:admin# 103-9 config firmware image Description This command is used to configure firmware as a boot-up image. Format config firmware image {unit } boot_up Parameters unit - (Optional) Specifies the unit ID used for this configuration. - Enter the unit ID used for this configuration here. 1043