D-Link DGS-3620-52T CLI Guide - Page 800

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Note: A traffic control trap is active only when the control action is configured as shutdown. If the control action is drop there will no traps issue while storm event is detected. Format config traffic trap [none | storm_occurred | storm_cleared | both] Parameters none - No notification will be generated when storm event is detected or cleared. storm_occurred - A notification will be generated when a storm event is detected. storm_cleared - A notification will be generated when a storm event is cleared. both - A notification will be generated both when a storm event is detected and cleared. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure a traffic control trap: DGS-3620-28SC:admin#config traffic trap both Command: config traffic trap both Success. DGS-3620-28SC:admin# 71-5 show traffic control Description This command is used to display current traffic control settings. Format show traffic control {} Parameters - (Optional) Specify a range of ports to be shown. Note: If no parameter is specified, the system will display all port packet storm control configurations. Restrictions None. 795