D-Link DGS-3620-52T CLI Guide - Page 84
Description, Format
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 0xffffffff> | offset_16-31 | offset_32-47 | offset_48-63 | offset_64-79 }(1) | ipv6 {class | flowlabel | source_ipv6_mask | destination_ipv6_mask }(1)] config cpu access_profile profile_id [add access_id [auto_assign | ] [ethernet {[vlan | vlan_id ] | source_mac | destination_mac | 802.1p | ethernet_type } | ip {[vlan | vlan_id ] | source_ip | destination_ip | dscp | [icmp {type | code } | igmp {type } | tcp {src_port | dst_port | flag [all | {urg | ack | psh | rst | syn | fin}]} | udp {src_port | dst_port } | protocol_id {user_define }]} | packet_content {offset_0-15 | offset_16-31 | offset_32-47 | offset_48-63 | offset_64-79 } | ipv6 {class | flowlabel | source_ipv6 | destination_ipv6 }] port [ | all] [permit | deny] {time_range } | delete access_id ] show cpu access_profile {profile_id } enable cpu_interface_filtering disable cpu_interface_filtering config flow_meter [profile_id | profile_name ] access_id [rate [] {burst_size []} rate_exceed [drop_packet | remark_dscp ] | tr_tcm cir {cbs } pir {pbs } {[color_blind | color_aware]} {conform [permit | replace_dscp ] {counter [enable | disable]}} exceed [permit {replace_dscp } | drop] {counter [enable | disable]} violate [permit {replace_dscp } | drop] {counter [enable | disable]} | sr_tcm cir cbs ebs {[color_blind | color_aware]} {conform [permit | replace_dscp ] {counter [enable | disable]}} exceed [permit {replace_dscp } | drop] {counter [enable | disable]} violate [permit {replace_dscp } | drop] {counter [enable | disable]} | delete] show flow_meter {[profile_id | profile_name ] {access_id }} 5-1 create access_profile profile_id Description This command is used to create access list profiles. Note: Please see the "Error! Reference source not found. Error! Reference source not found." section for a configuration example and further information. Format create access_profile profile_id profile_name [ethernet {vlan {} | source_mac | destination_mac | 802.1p | ethernet_type}(1) | ip {vlan {} | source_ip_mask | destination_ip_mask | dscp | [icmp {type | code} | igmp {type} | tcp {src_port_mask | dst_port_mask | flag_mask [all | {urg | ack | psh | rst | syn | fin}]} | udp {src_port_mask | 79