D-Link DGS-3620-52T CLI Guide - Page 818

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Bootstrap Router: 10.54.71.9 Group Address 224.0.0.0/4 224.0.0.0/4 RP Address ---------10.20.6.36 10.54.71.9 Total Entries: 2 DGS-3620-28SC:admin# Holdtime -------210 0 Expired Time -----------196 0 Type ---Dynamic Static 73-18 create pim register_checksum_include_data rp_address Description This command is used to decide the checksum in register packet will include the data portion or not. As defined in RFC 4601, the checksum for Registers is done only on the first 8 bytes of the packet, including the PIM header and the next 4 bytes, excluding the data packet portion. Some earlier PIM-SM routers will calculate checksum for register packet including data portion. This configuration makes our routers communicate with those earlier routers smoothly. The default set is not including data portion. Format create pim register_checksum_include_data rp_address Parameters rp_address - Specifies that the RP will expect to receive a register packet in which the checksum will be included in the data portion . - Enter the IP address used here. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To create an entry for a specific RP in which the checksum in the registered packet will include the data portion: DGS-3620-28SC:admin# create pim register_checksum_include_data rp_address 24.1.2.3 Command: create pim register_checksum_include_data rp_address 24.1.2.3 Success. DGS-3620-28SC:admin# 813