D-Link DGS-3620-52T CLI Guide - Page 193

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 12-43 show bgp community_list Description This command is used to show a BGP community list. Format show bgp community_list {} Parameters community_list - Specifies the name of community list to be displayed. - (Optional) Enter the community list name here. This name can be up to 16 characters long. Restrictions None. (EI Mode Only Command) Example This example displays the community list name as list1: DGS-3620-28SC:admin# create bgp community_list standard list1 Command: create bgp community_list standard list1 Success. DGS-3620-28SC:admin# config bgp community_list standard list1 add community_set 50000:10 permit Command: config bgp community_list standard list1 add community_set 50000:10 permit Success. DGS-3620-28SC:admin# show bgp community_list list1 Command: show bgp community_list list1 Community List Name: list1 Type : standard permit : 50000:10 DGS-3620-28SC:admin# 12-44 show bgp route Description This command is used to display route entries in the Border Gateway Protocol (BGP) routing table 188