D-Link DGS-3620-52T CLI Guide - Page 197

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide next hop is:0.0.0.0 ,from 0.0.0.0 (local router_id is:192.168.1.1) origin IGP, metric 100, localpref 0, weight 32768, sourced, best Community: no_advertise DGS-3620-28SC:admin# 12-45 show bgp neighbors Description This command is used to display BGP and TCP connections with the BGP neighbor or routing table entries containing a BGP neighbor. To display BGP and TCP connection information for neighbor sessions, or routing table entries with BGP neighbor. For BGP, this includes detailed neighbor attribute, capability, path, and prefix information. For TCP, this includes statistics related to BGP neighbor session establishment and maintenance. Format show bgp neighbors { {[advertised_routes | received_routes | routes | received_prefix_filter | statistics]}} Parameters neighbors - Detailed information about TCP and BGP neighbor connections. - (Optional) Enter the IP address used for the configuration here. advertised_routes - (Optional) Displays the routes advertised to a BGP neighbor. received_routes - (Optional) Displays the routes received from this neighbor. routes - (Optional) Displays routes in the routing table learned from the neighbor. received_prefix_filter - (Optional) Displays the prefix filter information that is received from a BGP neighbor. statistics - (Optional) Displays the statistical information learned. Restrictions None. (EI Mode Only Command) Example To show the BGP neighbor or routes relative to one neighbor: DGS-3620-28SC:admin# show bgp neighbor 10.10.10.2 Command: show bgp neighbor 10.10.10.2 BGP neighbor: 10.10.10.2 (Internal Peer) Session State : Enabled Session Activity : Enabled Remote AS : 1 Remote Router ID : 192.168.252.252 BGP State : Established ( UP for 00:24:25) Hold Time : 180 Seconds Keepalive Interval : 60 Seconds Advertisement Interval : 5 Seconds 192