D-Link DGS-3620-52T CLI Guide - Page 647
config mac_based_access_control guest_vlan ports, config mac_based_access_control ports
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 647 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 57-5 config mac_based_access_control guest_vlan ports Description This command is used to put the specified port in guest VLAN mode. For those ports not contained in the port list, they are in non-guest VLAN mode.For detailed information about the operation of guest VLAN mode, please see the description for configuring the MAC-based access control port command. Format config mac_based_access_control guest_vlan ports Parameters - When a port is configured as gurest VLAN member port, this port will move to guest VLAN if it's MAC-based access control state is enable. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the MAC-based access control guest VLAN membership for port 1 to 8: DGS-3620-28SC:admin# config mac_based_access_control guest_vlan ports 1-8 Command: config mac_based_access_control guest_vlan ports 1-8 Success. DGS-3620-28SC:admin# 57-6 config mac_based_access_control ports Description This command is used to configure the MAC-based access control setting. When the MAC-based access control function is enabled for a port, and the port is not a MAC-based access control guest VLAN member, the user who is attached to this port will not be forwarded unless the user passes the authentication. A user that does not pass the authentication will not be serviced by the switch. If the user passes the authentication, the user will be able to forward traffic operated under the assigned VLAN. When the MAC-based access control function is enabled for a port, and the port is a MAC-based access control guest VLAN member, the port(s) will be removed from the original VLAN(s) member ports, and added to MAC-based access control guest VLAN member ports. Before the authentication process starts, the user is able to forward traffic under the guest VLAN. After the authentication process, the user will be able to access the assigned VLAN. If the port authorize mode is port based mode, when the port has been moved to the authorized VLAN, the subsequent users will not be authenticated again. They will operate in the current authorized VLAN. If the port authorize mode is host based mode, then each user will be authorized individually and be capable of getting its own assigned VLAN. 642