D-Link DGS-3620-52T CLI Guide - Page 60
show accounting service
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format config accounting service [network | shell | system] state [enable | disable] Parameters network - Specify the accounting service for 802.1X and WAC/JWAC port access control. By default, the service is disabled. shell - Specify the accounting service for shell events. When a user logins or logouts of the switch (via the console, Telnet, or SSH) and when timeout occurs, accounting information will be collected and sent to the RADIUS server. By default, the service is disabled. system - Specify the accounting service for system events: reset and reboot. By default, the service is disabled. state - Specify the state of the accounting service. enable - Enable the specified accounting service. disable - Disable the specified accounting service. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the state of the RADIUS accounting service shell to enable: DGS-3620-28SC:admin# config accounting service shell state enable Command: config accounting service shell state enable Success DGS-3620-28SC:admin# 3-30 show accounting service Description This command is used to display RADIUS accounting service information. Format show accounting service Parameters None. Restrictions None. Example To display accounting service information: 55