D-Link DGS-3620-52T CLI Guide - Page 167
disable, half_life, <value 1-45>, reuse, <value 1-20000>, suppress, max_suppress_time, <
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide disable - Specifies that the BGP dampening function's state will be disabled. half_life - (Optional) Specifies the time (in minute) after which the penalty of the reachable routes will be down, by half. The default setting is 15 minutes. - Enter the half life value here. This value must be between 1 and 45 minutes. reuse - (Optional) If the penalty for a flapping route decreases enough to fall below this value, the route is unsuppressed. The default setting is 750. - Enter the re-use value used here. This value must be between 1 and 20000. suppress - (Optional) A route is suppressed when its penalty exceeds this limit. The default setting is 2000. - Enter the surpress value used here. This value must be between 1 and 20000. max_suppress_time - (Optional) Maximum time (in minutes) a route can be suppressed. The default setting is 45 minutes. - Enter the maximum suppress time value here. This value must be between 1 and 255 minutes. un_reachablity_half_life - (Optional) Specifies the time (in minute) after which the penalty of the unreachable routes will be down, by half. The default setting is 15 minutes. - Enter the the time after which the penalty of the unreachable routes will be down, by half here. This value must be between 1 and 45 minutes. Restrictions Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only Command) Example This command shows how to disable the dampening function: DGS-3620-28SC:admin# config bgp dampening state disable Command: config bgp dampening state disable Success. DGS-3620-28SC:admin# show bgp dampening Command: show bgp dampening BGP Dampening State :Enabled BGP Dampening Route_Map Half-life Time Reuse Value Suppress Value MAX Suppress Time Unreachable route's Half-life :dmp1 :15 mins :500 :900 :60 mins :15 mins DGS-3620-28SC:admin# show bgp route Command: show bgp route BGP Local Router ID is 20.90.90.90 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? - incomplete 162