D-Link DGS-3620-52T CLI Guide - Page 69

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 4-8 create authen_enable method_list_name Description This command is used to create a user-defined method list of authentication methods for promoting a user's privilege to Admin level. The maximum supported number of the enable method lists is eight. Format create authen_enable method_list_name Parameters - Specify the user-defined method list name. Restrictions Only Administrator-level users can issue this command. Example To create a user-defined method list for promoting a user's privilege to Admin level: DGS-3620-28SC:admin#create authen_enable method_list_name enable_list_1 Command: create authen_enable method_list_name enable_list_1 Success. DGS-3620-28SC:admin# 4-9 config authen_enable Description This command is used to configure a user-defined or default method list of authentication methods for promoting a user's privilege to Admin level. The sequence of methods will effect the authencation result. For example, if the sequence is TACACS+ first, then TACACS and local_enable, when a user tries to promote a user's privilege to Admin level, the authentication request will be sent to the first server host in the TACACS+ built-in server group. If the first server host in the TACACS+ group is missing, the authentication request will be sent to the second server host in the TACACS+ group, and so on. If all server hosts in the TACACS+ group are missing, the authentication request will be sent to the first server host in the TACACS group. If all server hosts in the TACACS group are missing, the local enable password in the device is used to authenticate this user's password. The local enable password in the device can be configured by the CLI command config admin local_enable. Format config authen_enable [default | method_list_name ] method {tacacs | xtacacs | tacacs+ | radius | server_group | local_enable | none}(1) 64