D-Link DGS-3620-52T CLI Guide - Page 671
config mld_proxy upstream_if
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 671 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Success. DGS-3620-28SC:admin# 60-4 config mld_proxy upstream_if Description This command is used to configure the setting for the MLD proxy's upstream interface. The MLD proxy plays the host role on the upstream interface. It will send MLD report packets to the router port. The source IP address determines the source IP address to be encoded in the MLD protocol packet. If the router port is empty, the upstream will send the MLD protocol packet to all member ports on the upstream interface. Format config mld_proxy upstream_if {vlan [ | vlanid ] | router_ports [add | delete] | source_ip | unsolicited_report_interval }(1) Parameters vlan - Specify the VLAN for the upstream interface. - Specify a VLAN name between 1 and 32 characters. vlanid - Specify the VLAN ID for the upstream interface. - Specify the VLAN ID between 1 and 4094. router_ports - Specify a list of ports that are connected to multicast-enabled routers. add - Specify to add the router ports. delete - Specify to delete the router ports. - Specify a range of ports to be configured. source_ip - Specify the source IPv6 address of the upstream protocol packet. If it is not specified, zero IP address will be used as the protocol source IP address. > - Specify the IPv6 address. unsolicited_report_interval - Specify the time between repetitions of the host's initial report of membership in a group. The default is 10 seconds. If set to 0, only one report packet is sent. - Specify the time between 0 and 25 seconds. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the router port of MLD proxy's upstream interface: DGS-3620-28SC:admin#config mld_proxy upstream_if vlan default router_ports add 3 Command: config mld_proxy upstream_if vlan default router_ports add 3 Success. DGS-3620-28SC:admin# 666