D-Link DGS-3620-52T CLI Guide - Page 86

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide packet_content_mask - A maximum of six offsets can be specified. Each offset defines one byte of data which is identified as a single UDF field. The offset reference is also configurable. It can be defined to start at the end of the tag, the end of the Ethernet type, or the end of the IP header. offset_chunk_1 - Specifies the offset chunk 1 that allows users to examine the specified offset_chunks within a packet at one time and specifies the frame content offset and mask. - Enter the offset chunk 1 value here. This value must be between 0 and 31. - Enter the offset chunk 1 mask value here. offset_chunk_2 - Specifies the offset chunk 2 that allows users to examine the specified offset_chunks within a packet at one time and specifies the frame content offset and mask. - Enter the offset chunk 2 value here. This value must be between 0 and 31. - Enter the offset chunk 2 mask value here. offset_chunk_3 - Specifies the offset chunk 3 that allows users to examine the specified offset_chunks within a packet at one time and specifies the frame content offset and mask. - Enter the offset chunk 3 value here. This value must be between 0 and 31. - Enter the offset chunk 3 mask value here. offset_chunk_4 - Specifies the offset chunk 4 that allows users to examine the specified offset_chunks within a packet at one time and specifies the frame content offset and mask. - Enter the offset chunk 4 value here. This value must be between 0 and 31. - Enter the offset chunk 4 mask value here. ipv6 - Specify the IPv6 filtering mask. class - Specify the IPv6 class mask. flowlabel - Specify the IPv6 flow label mask. source_ipv6_mask - Specify the IPv6 source IP mask. - Specify the IPv6 source IP mask. destination_ipv6_mask - Specify the IPv6 destination IP mask. - Specify the IPv6 destination IP mask. tcp - Specify that the rule applies to TCP traffic. src_port_mask - (Optional) Specify the TCP source port mask. - Specify the TCP source port mask. dst_port_mask - (Optional) Specify the TCP destination port mask. - Specify the TCP destination port mask. udp - Specify that the rule applies to UDP traffic. src_port_mask - (Optional) Specify the TCP source port mask. - Specify the TCP source port mask. dst_port_mask - (Optional) Specify the TCP destination port mask. - Specify the TCP destination port mask. icmp - Specify that the rule applies to ICMP traffic. type - (Optional) Specify the ICMP packet type. code - (Optional) Specify the ICMP code. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To create access list profiles: DGS-3620-28SC:admin#create access_profile profile_id 1 profile_name 1 ethernet vlan source_mac FF-FF-FF-FF-FF-FF destination_mac 00-00-00-FF-FF-FF 802.1p ethernet_type Command: create access_profile profile_id 1 profile_name 1 ethernet vlan source_mac FF-FF-FF-FF-FF-FF destination_mac 00-00-00-FF-FF-FF 802.1p ethernet_type Success. 81