D-Link DGS-3620-52T CLI Guide - Page 113
create egress_access_profile
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide delete port_group [id | name ] show port_group {id | name } 6-1 create egress_access_profile Description This command is used to create an egress access list profile. For example, for some hardware, it may be invalid to specify destination IPv6 address and source IPv6 address at the same time. The user will be prompted for these limitations. Format create egress_access_profile profile_id profile_name [ethernet {vlan {} | source_mac | destination_mac | 802.1p | ethernet_type} | ip {vlan {} | source_ip_mask | destination_ip_mask | dscp | [icmp {type | code} | igmp {type} | tcp {src_port_mask | dst_port_mask | flag_mask [all | {urg | ack | psh | rst | syn | fin}]} | udp {src_port_mask | dst_port_mask } | protocol_id_mask {user_define_mask }]} | ipv6 {class | source_ipv6_mask | destination_ipv6_mask | [tcp {src_port_mask | dst_port_mask } | udp {src_port_mask | dst_port_mask } | icmp {type | code}]}] Parameters profile_id - Specifies the index of the egress access list profile. The lower the profile ID, the higher the priority. - Enter the profile ID used here. This value must be between 1 and 4. profile_name - The name of the profile must be specified. The maximum length is 32 characters. - Enter the profile name used here. This name can be up to 32 characters long. ethernet - Specifies this is an Ethernet mask. vlan - (Optional) Specifies a VLAN mask. - Enter the VLAN mask used here. source_mac - (Optional) Specifies the source MAC mask. - Enter the source MAC mask used here. destination_mac - (Optional) Specifies the destination MAC mask. - Enter the destination MAC mask used here. 802.1p - (Optional) Specifies 802.1p priority tag mask. ethernet_type - (Optional) Specifies the Ethernet type mask. ip - Specifies this is an IPv4 mask. vlan - (Optional) Specifies a VLAN mask. - Enter the VLAN mask used here. source_ip_mask - (Optional) Specifies a source IP address mask. - Enter the source network mask used here. destination_ip_mask - (Optional) Specifies a destination IP address mask. - Enter the destination network mask used here. dscp - (Optional) Specifies the DSCP mask. icmp - (Optional) Specifies that the rule applies to ICMP traffic. type - Specifies the type of ICMP traffic. code - Specifies the code of ICMP traffic. igmp - (Optional) Specifies that the rule applies to IGMP traffic. type - Specifies the type of IGMP traffic. tcp - (Optional) Specifies that the rule applies to TCP traffic. 108