D-Link DGS-3620-52T CLI Guide - Page 180

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide amount of unwanted routing updates from the remote peer. Format config bgp neighbor filter [ | peer_group ] {filter_list [in | out] [add | delete] | prefix_list [in | out] [add | delete] | capability_orf_prefix_list [receive | send | both | none]}(1) Parameters - Specifies the IP address of the neighbor to be configured. peer_group- Specifies the peer group to be configured. - Enter the peer group name here. This name can be up to 16 characters long. filter_list - (Optional) Specifies the name of an as_path access_list to be applied as a filter. The filtering can be applied to incoming routes or outgoing routes. in - Specifies that the filter specified will be used for incoming traffic. out - Specifies that the filter specified will be used for outgoing traffic. add - Specifies that a filter list will be added. delete - Specifies that a filter list will be deleted. - Enter the filter list name here. This name can be up to 16 characters long. prefix_list - (Optional) Specifies the name of a prefix_list to be applied as a filter. The filtering can be applied to incoming routes or outgoing routes. in - Specifies that the filter specified will be used for incoming traffic. out - Specifies that the filter specified will be used for outgoing traffic. add - Specifies that a filter list will be added. delete - Specifies that a filter list will be deleted. - Enter the prefic list name here. This name can be up to 16 characters long. capability_orf_prefix_list - (Optional) Used to configure an outbound route filter prefix list capability. It can be sent with the following values: receive - Enables the ORF prefix list capability in the receiving direction. The local router will install the prefix filter list notified by the remote router. send - Enables the ORF prefix list capability in the sending direction. The local router will notify the remote router for the ORF prefix list capability. both - Enables the ORF prefix list capability in both received and send directions. none - Disable the ORF prefix list capability in both received and send directions. Restrictions Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only Command) Example This example shows how to configure the BGP neighbor ingress filter list for the peer group "Campus" to List1: DGS-3620-28SC:admin# config bgp neighbor filter peer_group Campus filter_list in add List1 Command: config bgp neighbor filter peer_group Campus filter_list in add List1 Success. DGS-3620-28SC:admin# 175