D-Link DGS-3620-52T CLI Guide - Page 1065
config vrrp ipif, delete vrrp
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1065 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 104-5 config vrrp ipif Description This command is used to configure a virtual router authentication type on an interface. Format config vrrp ipif [authtype [none | simple authdata | ip authdata ]] Parameters ipif - Specifies the name of IP interface used for this configuration. - Enter the IP interface name used here. This name can be up to 12 characters long. authtype - Specifies the VRRP's authentication type. none - Specifies that no authentication algorithm will be used on this interface. simple - Specifies that the authentication algorithm will be set to simple text on this interface. authdata - Specifies the authentication data used in the simple text authentication algorithm. - Enter the authentication data used in the simple text authentication algorithm here. This value can be up to 8 characters long. ip - Specifies that the authentication algorithm will be set to IP authentication header on this interface. authdata - Specifies the authentication data used in the IP authentication header algorithm. - Enter the authentication data used in the IP authentication header algorithm here. This value can be up to 16 characters long. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure a VRRP IP interface: DGS-3620-28SC:admin# config vrrp ipif System authtype simple authdata 12345678 Command: config vrrp ipif System authtype simple authdata 12345678 Success. DGS-3620-28SC:admin# 104-6 delete vrrp Description This command is used to delete the VRRP settings. Format delete vrrp {vrid ipif } 1060