D-Link DGS-3620-52T CLI Guide - Page 1101
config wac ports
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1101 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Parameters radius - If specified to enable, the authorized data assigned by the RADUIS server will be accepted if the global authorization network is enabled. The default state is enabled. enable - Specify to enable authorized data assigned by the RADIUS server to be accepted. disable - Specify to disable authorized data assigned by the RADIUS server from being accepted. local - If specified to enable, the authorized data assigned by the local database will be accepted if the global authorization network is enabled. The default state is enabled. enable - Specify to enable authorized data assigned by the local database to be accepted. disable - Specify to disable authorized data assigned by the local database from being accepted. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the acceptance of an authorized configuration: DGS-3620-28SC:admin#config wac authorization attributes local disable Command: config wac authorization attributes local disable Success. DGS-3620-28SC:admin# 108-4 config wac ports Description This command is used to configure the WAC port parameters. Format config wac ports [ | all] {state [enable | disable] | aging_time [infinite | ] | idle_time [infinite | ] | block_time []}(1) Parameters - Specify a range of ports to configure. all - Specify to configure all ports. state - Specify to enable or disable the WAC state. enable - Specify to enable the WAC state. disable - Specify to disable the WAC state. aging_time - Specify a time period during which an authenticated host will be kept in authenticated state. The default value is 1440 minutes. infinite - Specify to indicate the authenticated host on the port will not ageout. - Specify an ageout value between 1 and 1440 minutes. idle_time - Specify a time period after which an authenticated host will be moved to unauthenticated state if there is no traffic during that period. The default value is infinite. infinite - Specify to indicate the host will not be removed from the authenticated state due to idle of traffic. - Specify an idle time between 1 and 1440 minutes. block_time - If a host fails to pass the authentication, it will be blocked for this period of time 1096