D-Link DGS-3620-52T CLI Guide - Page 717

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide addresses are specified, then there is nothing to prevent any IP address from accessing the switch, provided the user knows the Username and Password. Format create trusted_host [ | | network | ipv6_prefix ] {snmp | telnet | ssh | http | https | ping} Parameters - Specify the IP address of the trusted host. - Specify the IPv6 address of the trusted host. network - Specify the network address of the trusted network. The form of network address is xxx.xxx.xxx.xxx/y. - Specify the network address of the trusted network. The form of network address is xxx.xxx.xxx.xxx/y. ipv6_prefix - Specify the IPv6 network address of the trusted network. - Specify the IPv6 network address of the trusted network. snmp - (Optional) Specify the trusted host for SNMP. telnet - (Optional) Specify the trusted host for Telnet. ssh - (Optional) Specify the trusted host for SSH. http - (Optional) Specify the trusted host for HTTP. https - (Optional) Specify the trusted host for HTTPs. ping - (Optional) Specify the trusted host for Ping. Note: If no management method is specified, the IP (range) can access the Switch through any method. Restrictions Only Administrator and Operator-level users can issue this command. Example To create a trusted host: DGS-3620-28SC:admin#create trusted_host 10.48.74.121 Command: create trusted_host 10.48.74.121 Success. DGS-3620-28SC:admin# 66-4 config trusted_host Description This command is used to configure the access interfaces for the trusted host. Format config trusted_host [ | | network | ipv6_prefix ] [add | delete] {snmp | telnet | ssh | http | https | ping | all} 712