D-Link DGS-3620-52T CLI Guide - Page 160

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide DGS-3620-28SC:admin# delete bgp aggregate_address 10.0.0.0/8 Command: delete bgp aggregate_address 10.0.0.0/8 Success. DGS-3620-28SC:admin# 12-10 show bgp aggregate_address Description This command is used to show the aggregate entries in the Border Gateway Protocol (BGP) database. Format show bgp aggregate_address {} Parameters - Specifies the IP aggregated network address. If specific network address is not specified, all aggregated address will be displayed. Restrictions None. (EI Mode Only Command) Example To display an aggregate route of 10.0.0.0/8: DGS-3620-28SC:admin# show bgp aggregate_address 10.0.0.0/8 Command: show bgp aggregate_address 10.0.0.0/8 Network Address Options 10.0.0.0/8 summary_only, as_set Total Aggregate Address Number: 1. DGS-3620-28SC:admin# 12-11 create bgp network Description This command is used to specify the network advertised by the Border Gateway Protocol (BGP). BGP networks can be learned from connected routes, from dynamic routing, and from static route sources. Format create bgp network {route_map } 155