D-Link DGS-3620-52T CLI Guide - Page 384
config dhcpv6 pool dns_server
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 384 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the domain name for the DHCPv6 pool pool1: DGS-3620-28SC:admin# config dhcpv6 pool domain_name pool1 dlink.com Command: config dhcpv6 pool domain_name pool1 dlink.com Success. DGS-3620-28SC:admin# 25-6 config dhcpv6 pool dns_server Description This command is used to configure the DNS server's IPv6 addresses for a specific DHCPv6 pool. Users may add up to two DNS Server addresses. If DNS server is not specified, the DNS server information will not be provided to the client. Users could delete a DNS server address in the method of setting the DNS server address to zero. Format config dhcpv6 pool dns_server {} Parameters - Enter the DHCPv6 pool name used here. This name can be up to 12 characters long. - Enter the primary DNS Server IPv6 address used for this pool here. - (Optional) Enter the secondary DNS Server IPv6 address used for this pool here. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the DNS server address for a DHCPv6 pool: DGS-3620-28SC:admin# config dhcpv6 pool dns_server pool1 2000::200 2000::201 Command: config dhcpv6 pool dns_server pool1 2000::200 2000::201 Success. DGS-3620-28SC:admin# 379