D-Link DGS-3620-52T CLI Guide - Page 988
enable ssh
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 988 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Format config ssh server {maxsession | contimeout | authfail | rekey [10min | 30min | 60min | never] | port }(1) Parameters maxsession - Specify the SSH server maximum session at the same time. - Specify the SSH server maximum session at the same time. The maximum session value must be between 1 and 8. The default value is 8. contimeout - Specify the SSH server connection timeout. - Specify the SSH server connection timeout. The connection timeout value must be between 30 and 600 seconds. The default value is 120 seconds. authfail - Specify the user maximum fail attempts. - Specify the user maximum fail attempts. The maximum authentication fail attempts must be between 2 and 20. The default value is 2. rekey - (Optional) Specify the time to re-generate the session key. 10min - Specify 10 minutes to re-generate the session key. 30min - Specify 30 minutes to re-generate the session key. 60min - Specify 60 minutes to re-generate the session key. never - Do not re-generate the session key. port - Specify a TCP port number between 1 and 65535. - Specify a TCP port number between 1 and 65535. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure an SSH server maximum session of 3: DGS-3620-28SC:admin#config ssh server maxsession 3 Command: config ssh server maxsession 3 Success. DGS-3620-28SC:admin# 91-8 enable ssh Description This command is used to enable SSH server services. Format enable ssh Parameters None. 983