D-Link DGS-3620-52T CLI Guide - Page 884
Protocol VLAN, Commands
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 884 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Chapter 80 Protocol VLAN Commands create dot1v_protocol_group group_id group_name config dot1v_protocol_group [group_id | group_name ] [add protocol [ethernet_2 | ieee802.3_snap | ieee802.3_llc] | delete protocol [ethernet_2 | ieee802.3_snap | ieee802.3_llc] ] delete dot1v_protocol_group [group_id | group_name | all] show dot1v_protocol_group {group_id | group_name } config port dot1v ports [ | all] [add protocol_group [group_id | group_name ] [vlan | vlanid ] {priority } | delete protocol_group [group_id | all]] show port dot1v {ports } 80-1 create dot1v_protocol_group Description This command is used to create a protocol group for the protocol VLAN function. Format create dot1v_protocol_group group_id group_name Parameters group_id - Specify the ID of the protocol group which is used to identify a set of protocols. - The ID range is between 1 and 16. group_name - Specify the name of the protocol group. - Specify the name of the protocol group. The maximum length is 32 characters. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To create a protocol group: DGS-3620-28SC:admin#create dot1v_protocol_group group_id 4 group_name General_Group Command: create dot1v_protocol_group group_id 4 group_name General_Group Success. DGS-3620-28SC:admin# 879