D-Link DGS-3620-52T CLI Guide - Page 1107
config wac user, show wac
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1107 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide 108-12 config wac user Description This command is used to change the VLAN associated with a user. Format config wac user [vlan | vlanid | clear_vlan] Parameters - Specify the name of user account which will change its VID. vlan - Specify the authentication VLAN name. - Specify the authentication VLAN name. The VLAN name can be up to 32 characters long. vlanid - Specify the authentication VLAN ID. - Specify the authentication VLAN ID. The VLAN ID must be between 1 and 4094. clear_vlan - Specify to clear the specified VLAN. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the user's VLAN: DGS-3620-28SC:admin# config wac user abc vlanid 100 Command: config wac user abc vlanid 100 Enter a old password:** Enter a case-sensitive new password:** Enter the new password again for confirmation:** Success. DGS-3620-28SC:admin# 108-13 show wac Description This command is used to display the WAC global setting. Format show wac Parameters None. 1102