D-Link DGS-3620-52T CLI Guide - Page 120

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Parameters profile_id - (Optional) Specifies the index of the egress access list profile. - Enter the profile ID here. This value must be between 1 and 4. profile_name - (Optional) Specifies the name of the profile. The maximum length is 32 characters. - Enter the profile name here. This name can be up to 32 characters long. If no parameter is specified, will show the all egress access profile. Restrictions None. Example To display current egress access list table: DGS-3620-28SC:admin# show egress_access_profile Command: show access_profile Egress Access Profile Table Total User Set Rule Entries : 3 Total Used Hardware Entries : 3 Total Available Hardware Entries : 253 Profile ID: 1 Profile name: 1 Type: Ethernet Mask on Source MAC : FF-FF-FF-FF-FF-FF Available Hardware Entries : 127 Rule ID : 1 Port group: - Match on VLAN ID Source MAC : 1 : 00-00-00-00-00-01 Action: Permit Profile ID: 2 Profile name: 2 Type: IPv4 Mask on Source IP : 255.255.255.255 115