D-Link DGS-3620-52T CLI Guide - Page 229
show cfm
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Restrictions None. (EI Mode Only Command) Example To display the CFM state for ports 3 to 6: DGS-3620-28SC:admin#show cfm ports 3-6 Command: show cfm ports 3-6 Port ----3 4 5 6 State ------Enabled Enabled Enabled Enabled DGS-3620-28SC:admin# 15-14 show cfm Description This command is used to display the CFM configuration. Format show cfm {[md [ | md_index ] {ma [ | ma_index ] {mepid }} | mepname ]} Parameters md - (Optional) Specify the maintenance domain name. - Specify the maintenance domain name. The maximum length is 22 characters. md_index - Specify the maintenance domain index. - Enter the maintenance domain index value here. This value must be between 1 and 4294967295. ma - (Optional) Specify the maintenance association name. - Specify the maintenance association name. The maximum length is 22 characters. ma_index - Specify the maintenance association index. - Enter the maintenance association index value here. This value must be between 1 and 4294967295. mepid - (Optional) Specify the MEPID. - Specify the MEP MEPID between 1 and 8191. mepname - (Optional) Specify the MEP name. - Specify the MEP name. The maximum length is 32 characters. Restrictions None. (EI Mode Only Command) 224