D-Link DGS-3620-52T CLI Guide - Page 618

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide DGS-3620-28SC:admin#config lldp_med fast_start repeat_count 5 Command: config lldp_med fast_start repeat_count 5 Success. DGS-3620-28SC:admin# 53-10 config lldp_med log state Description This command is used to configure the log state of LLDP-MED events. Format config lldp_med log state [enable | disable] Parameters enable - Enable the log state for LLDP-MED events. disable - Disable the log state for LLDP-MED events. The default is disabled. Restrictions Only Administrator and Operator-level users can issue this command. Example To enable the log state of LLDP-MED events: DGS-3620-28SC:admin#config lldp_med log state enable Command: config lldp_med log state enable Success. DGS-3620-28SC:admin# 53-11 config lldp_med notification topo_change ports Description This command is used to enable or disable each port for sending topology change notification to configured SNMP trap receiver(s) if an endpoint device is removed or moved to another port. The default state is disabled. Format config lldp_med notification topo_change ports [ | all] state [enable | disable] Parameters - Specify a range of ports to be configured. 613