D-Link DGS-3620-52T CLI Guide - Page 351
config dhcp_relay option_82 state
View all D-Link DGS-3620-52T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 351 highlights
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide Parameters default - Use the switch's system MAC address as remote ID. user_define - Use the user-defined string as remote ID. Space characters are allowed in the string. - The user-defined string can be up to 32 characters long. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the remote ID string of the DHCP relay agent information Option 82: DGS-3620-28SC:admin#config dhcp_relay option_82 remote_id user_define D-Link Switch Command: config dhcp_relay option_82 remote_id user_define D-Link Switch Success. DGS-3620-28SC:admin# 22-15 config dhcp_relay option_82 state Description This command is used to configure the state of the DHCP relay agent information Option 82 of the switch. The default settings is disabled. Format config dhcp_relay option_82 state [enable | disable] Parameters enable - When the state is enabled, the DHCP packet will be inserted with the Option 82 field before being relayed to server. The DHCP packet will be processed based on the behavior defined in the check and policy setting. disable - When the state is disabled, the DHCP packet will be relayed directly to the server without further check and processing of the packet. Restrictions Only Administrator, Operator and Power-User level users can issue this command. Example To configure the state of the DHCP relay agent information Option 82: DGS-3620-28SC:admin#config dhcp_relay option_82 state enable Command: config dhcp_relay option_82 state enable 346